DIVISION 10 - PEDESTRIAN CONTROL DEVICES

 

SECTION 10450 - TURNSTILES

 

3-WING TRANSPALOCK SECURITY TURNSTILE

PART I - GENERAL

 

 

1.01 SECTION INCLUDES

 

A.  This section covers the furnishing and installation of a complete Automatic Security Turnstile. Provide complete system that has been fabricated, assembled, and tested for proper operation at the factory. It includes railings, door wings, glass, motor drive system and security system as required for installation.

 

 

1.02   RELATED SECTIONS

 

A.  Section 07915 - Sealants, Caulking and Seals

      B.  Section 08400 - Entrances and Storefronts

      C.  Section 08710 - Door Hardware

D.  Section 08810 - Glass and Glazing

E.   Section 09600 - Flooring

F.   Section 16123 - Electrical Supply and Termination

 

1.03   QUALITY ASSURANCE

 

A. Manufacturer shall be a company specializing in the supply of automatic security turnstiles with a minimum of 5 years experience.

 

B.  Installer shall supply a factory-trained supervisor during installation of the door.

 

 

1.04 SUBMITTALS

 

A.  Submit project specific shop drawings, finish samples and Operating & Maintenance Manuals in accordance with Section (          ).

 

B.  Indicate pertinent dimensions, general construction, component connections and locations, anchorage methods and locations, hardware, and installation details.

 

1.05   DELIVERY, STORAGE AND HANDLING

 

A.  Deliver materials to job site in manufacturer's packaging undamaged, complete with installation instructions.

 

B.  Store off ground, under cover, protected from weather and construction activities.

 

1.06   PROJECT/SITE CONDITIONS

 

A.  Turnstiles install on finished floor. Floor must be level.

 

1.07   WARRANTY

 

Boon Edam warranties its products against defects in material and workmanship for a period of one (1) year from the date of substantial completion. This warranty excludes glass breakage, normal wear on finishes or damage that occurs due to abuse, misuse or acts of God.

 

 

 

PART II - PRODUCTS

 

 

2.01 MANUFACTURER

 

Factory assembled and tested 3-wing Transpalock Automatic Security Turnstile as manufactured by:

Boon Edam, Inc., 4050 South 500 West, Salt Lake City, Utah 841 23.

(801) 261-8980 Fax: (801) 261-1612 Homepage: www.boonedam.com

 

 

AUTHORIZED DISTRIBUTOR:

 

Ontario Door Controls

1350 Matheson Boulevard East

Unit 16, Mississauga

Ontario, Canada.

Phone: (905) 238 9222

Fax    : (905) 238 9279

e-mail: products@automaticdoorsystems.com

                            Website: http://www.automaticdoorsystems.com

 

 

2.02 CONSTRUCTION

 

A.  Frame: Shall be manufactured from 4Omm brushed stainless steel tubes curved to a 5'-0" diameter and 1/4" curved tempered glass connected to the tubes with brushed stainless steel connectors.

 

B.  Door Wings: Three door wings manufactured of 1/4" tempered safety glass.

 

C.  Center Shaft: Steel framework containing all of the controls. Center shaft is clad with brushed stainless steel sheet.

 

2.03 EQUIPMENT

 

A.   Drive System: Electromechanical drive system specially designed for the Transpalock mounted inside the center column together with all of the controls. The drive system is bi-directional, allowing two-way traffic (not simultaneously). In case of power failure, the doorset can be operated manually. (Requires a 208-230V, 10 A service from below finished floor).

 

B.     Locking Device: Electromagnetic locking device linked directly to the center shaft, capable of stopping the doorset at any position. The locking device is activated in the rest position by a card reader or remote push button. The Tourlock locking device unlocks in the case of a power failure.

 

C.               Controls: Microprocessor-based electronics utilizing a 800-step Programmable Logic Controller (PLC) with the following characteristics:

            1.               RAM & ROM memory

               2.         Lithium battery backup

3. Self-diagnostics for quick detection of problem source

4. Visual display of problem source

 

 

2.04 SECURITY EQUIPMENT

 

A.  Actuation: Door actuation by external card reader, biometric reader, key pad or remote push button. Although tied into the Circelock, actuation devices are not by Boon Edam.

 

2.05 MATERIALS

 

A.  Tempered Glass: All glass shall be 1/4" clear tempered safety glass.

 

 

PART III - EXECUTION

 

3.01 INSTALLATION

 

A. Inspection: Installer must examine the location and advise the Contractor of any site conditions unacceptable for proper installation of product.

 

B.  Erection: Install turnstiles in accordance with manufacturer's printed instructions. Set units level, plumb, and with uniform hairline joints. Anchor securely into place. Use only factory-trained installers.

 

C. Adjustment: Installer shall adjust door and hardware for smooth operation and proper performance.

 

D. Instruction: A factory trained installer shall demonstrate to the owner's maintenance crew the proper operation of the door and the necessary service requirements such as lubrication, cleaning, and inspection of components.

 

E.   Cleaning: Clean metal and glass surfaces carefully after installation to remove excess caulk, dirt and labels.

 

 

Boon Edam, Inc. reserves the right to change this specification at any time without notice.