Aesthetics 
Narrow - line flush glazing door and enclosure sections. 
Collapsing mechanism and speed controller concealed - sealed against ingress of water or salt solution. 
All fastenings concealed - snap-on glass stops throughout. 
Adaptable to specific design requirements. 

Standard and Custom Models 
Standard aluminum models 7'-00" height (2134 mm height).  Custom models fabricated to specific requirements, in aluminum, stainless steel and bronze. 

Heavy Duty Extrusions 
Door wing sections feature 3/8" wall (10 mm wall) thickness to ensure frame rigidity and high impact resistance. 

Emergency Egress 
Revolving door wings fold into bookfold position under panic loading conditions.  Collapsing pressure factory set for specific design condition, depending on door size and wind loading conditions. 

Serviceability 
Door wings easily removed, providing rapid access to speed controller.  Down time minimal.  Maintenance contract available to ensure long service life. 

Optional Features 
All glass canopy. 
Dead bolt locks. 
Tinted glass - wings and enclosure. 
Over head controls (manual model only). 
Custom push bars or plates. 
Custom corporate identity engraving. 
Rushmatic power assist. 
Quarter line stopping. 
Floor grilles, ceiling grilles. 
Ceiling lights, circular fluorescent. 
Rubber mats. 
Three wing or four wing models. 
Vertical grilles for double air plenum enclosures. 
Laminated curved glass available. 

Revolving Door Advantages 
Energy savings in heat and air conditioning costs. 
Ingress/egress unaffected by high winds or stack draft. 
No drafts even when operating. 
Low maintenance. 
Minimizes ingress of dust laden air. 
Unaffected be temperature or climatic conditions. 
Minimizes usage of adjacent swing doors. 

Selection Considerations 
1.  Use larger diameter doors where practical - consider 7'-0" diameter (2134 mm dia.) optimum: 6'-6" diameter (1981 mm dia.) minimum. 
2.  Custom push bars must permit bookleaf fold function. 
3.  Consider standard size doors when early delivery is important - same quality workmanship throughout. 

Code Conformity 
Conforms to National Building Code of Canada requirements for egress purposes.  One half exit unit permitted for each revolving door. 

Rushmatic Hydraulic Model (Floor Mounted Only) 
A complete Power assist door package. 
Includes - 
Power Pack with Electrics. 
Control Box with Switching Indicators. 

Functions - 
Continuous Revolving operation. 
Power Assist Revolution - Stopping once every revolution. 
Power off - Door can operate manually. 

Note - 
Excessive external wind gusts may cause automatic door to revolve more than once before coming to complete dead stop. 
Features of Power Operated Doors - 
More control on flow of traffic. 
Less air infiltration, saving on cost of energy. 
Greater ease of egress/ingress on usuage of large and heavier doors.